Troubleshooting – Belkin F5D7632UK4 User Manual
Page 74
73
72
Troubleshooting
73
72
Supported Operating Systems:
• Windows XP Professional
• Windows XP Home Edition
Enabling WPA-PSK (no server)
1.
Under Windows XP, click “Start > Control Panel > Network
Connections”.
2.
Right-clicking on the “Wireless Networks” tab will display the
following screen. Ensure the “Use Windows to configure my
wireless network settings” check box is checked.
3.
Under the “Wireless Networks” tab, click the “Configure” button.
4.
For a home or small business user, select “WPA-PSK” under
“Network Administration”.
Note:
Select WPA (with radius server) if you are using this
computer to connect to a corporate network that supports an
authentication server such as a radius server. Please consult
your network administrator for further information.
5.
Select “TKIP” or “AES” under “Date Encryption”. This setting will
have to be identical to the wireless router or access point that
you set up.
6.
Type in your encryption key in the “Network Key” box.
Important:
Enter your pre-shared key. This can be from eight
to 63 characters and can be letters, numbers, or symbols. This
same key must be used on all of the clients that you set up.
7.
Click “OK” to apply settings.