Belkin F5D7632UK4 - Manual (Page 63)

61
Troubleshooting
61
se
ct
io
n
2
1
3
4
5
6
7
8
9
10
Problem:
The ADSL LED is not on.
Solution:
1.
Check the connection between the Router and ADSL line. Make
sure the cable from the ADSL line is connected to the port on
the Router labeled “DSL Line”.
2. Make sure the Router has power. The Power LED on the front
panel should be illuminated.
Problem:
The Internet LED is not on.
Solution:
1.
Make sure the cable from the ADSL line is connected to the port
on the Router labeled “DSL Line” and the ADSL LED
is on.
2. Make sure you have the correct VPI/VCI, user name, and
password from your ISP provider.
Problem:
My connection type is static IP address. I can’t connect to
the Internet.
Solution:
Since your connection type is static IP address, your ISP must assign
you the IP address, subnet mask, and gateway address. Instead of
using the Wizard, go to “Connection Type”, and then select your
connection type. Click “Next”, select “Static IP”, and enter your IP
address, subnet mask, and default gateway information.
Problem:
I’ve forgotten or lost my password.
Solution:
Press and hold the “Reset” button on the rear panel for at least six
seconds to restore the factory defaults.