Bissell 7920 - Manual (Page 12)

12
Stain Removal
Do Not Delay! Failure to attend to an accident soon after it occurs
may cause it to set and become permanent.
Before treating any stain, follow these pretreatment steps:
Blot up liquids with an absorbent cloth or paper towels.
White materials are recommended because certain dyes
may bleed and make the stain worse.
Gently scrape up semi-solids with a spoon or spatula.
Do not use a knife or other utensil with sharp edges
because it could damage the carpet or upholstery.
If the area has dried, remove the remaining semi-solids
and residue with a sweeper or vacuum.
Be sure to pre-test any spot removal solutions or chemicals
on an inconspicuous area first. This is extremely
important; different dyes and materials could be damaged
or discoloured by a cleaning solution. If such a change
should occur, try a different solution or call a professional. If
cleaning on Berber Carpet gently run your machine over
a hidden area. If no fuzzing occurs, continue cleaning in
soiled area.
Use your BISSELL Deep Cleaner as a precleaner. With
one of the tools attached to the Flex Hose, set the
ReadyTools Dial to Tools/PreTreat and the Smart Mix
Dial to the High Traffic setting. Spray the area with
cleaning solution and allow the BISSELL Advanced Deep
Cleaning Formula to penetrate for 3-5 minutes.
Once the precleaning is complete, use the attached tool
to gently scrub the stain with back and forth strokes.
Allow to dry. Some difficult stains may require a second
treatment.
1.
2.
3.
4.
6.
5.
7.
ug310-5815_7920E_604.indd 12 ug310-5815_7920E_604.indd 12 3/29/06 3:39:46 PM 3/29/06 3:39:46 PM