Bissell 7920 - Manual (Page 14)

14
The Scotchgard protector applicator (with formula included) can be used to
help retain the carpet cleanliness you achieve with your ProHeat Pro-Tech
machine. For best results the post cleaning treatment should be applied
while the carpet is still wet or damp. It is recommended that the Scotchgard
protector is applied every 12 months in all carpeted areas, and after every
deep cleaning for high traffic areas such as hallways and stairs.
Immediately after cleaning and rinsing your carpets, empty the
Tank-in-Tank and refill the bladder with clean hot tap water.
(See page 8 for instructions.)
Set the ReadyTools Dial to Tools/PreTreat.
Purge the hose to eliminate cleaning solution from the tube by
spraying water through the hose without attachments into a
sink for 15-30 seconds.
Attach cartridge to the Applicator Tool, following instructions
on cartridge.
Turn the SmartMix Dial to the Water Rinse/Carpet Protector setting.
Place the Applicator Tool with the cartridge attached onto the
end of the Flex Hose. The water from the Tank-in-Tank will
automatically mix with the concentrated protector formula
contained in the cartridge.
Before applying Scotchgard protector, test a small, hidden area
for colourfastness. Examine area when dry. If color is affected,
do not use. For upholstery look for manufacturer’s cleaning
code tag. Use on fabrics coded “W” or “WS”. If coded “S” or
“X” do not use. Not recommended for use on velvet, silk vinyl,
leather or 100% cotton upholstery.
Plan your route to leave an exit path. It is best to begin
protecting in the corner farthest from your exit.
Apply Scotchgard protector in a slow sweeping motion with a
slight overlap of the treated area. For best coverage, follow the
guide on the cartridge.
One 8 oz. cartridge protects 200 square feet (18.6 square
meters). This is equal to two average size rooms (each at 10 x
10 feet or 3 x 3 meters). Periodically check the product level in
the bottle to ensure best coverage.
Be careful not to spray the protector onto furniture or fabric
that has not been tested for colourfastness. If this does occur,
wipe off the protector.
Remove cartridge from Applicator Tool. If concentrate is left,
put the cap on and store for later use at room temperature.
With Applicator Tool still on the end of Flex Hose, spray clean
hot water into sink to avoid any future clogging.
Store tool on the back of unit in the caddy.
2.
3.
4.
5.
6.
7.
8.
Scotchgard ™ Protector Applicator (Optional)
9.
Tip:
If clogged, soak
applicator tool
in hot tap water
before using.
10.
11.
12.
13.
14.
1.
ug310-5815_7920E_604.indd 14 ug310-5815_7920E_604.indd 14 3/29/06 3:39:47 PM 3/29/06 3:39:47 PM