Preamp – Boss Audio Systems DIGITAL RECORDING STUDIO BR-1600CD User Manual

Page 103

Advertising
background image

103

Insert effect parameter functions

Section 2

Preamp

This effect is used to adjust the distortion and tone of guitar
sounds.

*

When Bass, Middle, and Treble are all set to 0, certain Amp Type
settings may result in no sound being output.

Effect On/Off

OFF, ON

Turns the preamp effect on or off.

Amp Type

This sets the type of preamp to be used. The distortion and tone
characteristics of each amp are as shown below:

With “COSM COMP GUITAR AMP,” or

“VO+GT.AMP” algorithms

With “COSM BASS AMP” or “COSM

COMP BASS AMP” algorithms

Volume

0–100

Adjusts the volume and distortion of the amp.

Bass

GUITAR AMP: 0–100, BASS AMP: -100–+100

Adjusts the tone for the low frequency range.

Middle

GUITAR AMP: 0–100, BASS AMP:-100–+100

Adjusts the tone for the middle frequency range.

*

If you have selected “MATCH” or “VO DRV” as the preamp type, the
middle control will have no effect.

Treble

GUITAR AMP: 0-100, BASS AMP: -100–+100

Adjusts the tone for the high frequency range.

Presence

0–100

Adjusts the tone of the ultra-high frequency range.

*

This is not displayed when the algorithm is “COSM BASS AMP” or
“COSM COMP BASS AMP.”

*

If you have selected “MATCH” or “VO DRV” as the preamp type,
raising the presence will cut the high range (i.e., the value will change
from “0” to “-100”).

Master

0–100

Adjusts the overall volume of the preamp.

Bright

OFF, ON

Turns the bright setting on or off.

OFF:

No brightness is added.

ON:

Brightness is added to create a lighter, crisper tone.

*

This will not be displayed for certain Amp Type settings.

Gain

LOW, MIDDLE, HIGH

Adjusts the distortion generated by the amp, with the level
increasing in sequence for LOW, MIDDLE, and HIGH.

*

The sound of each type is created with the assumption that gain is set to
MIDDLE. It is normal, therefore, to use this setting.

JC-120

The sound of the Roland “JC-120,” a favor-
ite of pro musicians around the world.

CLEAN

The sound of a conventional built-in tube
amp.

CRUNCH

Allows you to reproduce a crunch effect
and recreate natural distortion.

MATCH

The latest tube-amp sound widely used in
all styles from blues and rock.

VO DRV

The Liverpool sound of the 60’s.

BLUES

A lead sound with a rich middle ideal for
blues.

BG LEAD

The sound of a tube amp typical of the late
‘70s to ‘80s and characterized by a distinc-
tive midrange.

MS

The sound of a large tube-amp stack that
was indispensable to the British hard rock
of the 70’s and is still used today by many
hard rock guitarists.

1

A trebly sound created by using in-
put I of the guitar amp.

2

A trebly sound created by using in-
put II of the guitar amp.

1+2

The sound achieved by connecting
Inputs I and II on the guitar amp in
parallel, and giving a stronger low
end than can be achieved with Input
I alone.

SLDN

A tube amp sound with versatile distortion,
usable in a wide range of styles.

METAL

The sound of a large tube amp, suitable for
heavy metal.

METAL D

A powerful, high-gain metal sound.

AC

The vintage sound of an early transistor
amp.

AMG

The sound of a large double-stack, vacuum-
tube amp with ultra-lows and a crisp edge.

BR-1600_R_e.book 103 ページ 2007年12月6日 木曜日 午前9時52分

Advertising