Boss Audio Systems DIGITAL RECORDING STUDIO BR-1600CD User Manual
Page 28
28
Panel Descriptions
fig.05-01c
28. SPEAKER MODELING button
Use this button to turn the Speaker Modeling on and off, and
also to call up a screen for setting of its parameters.
“Recreating the characteristics of different monitor
speakers (Speaker Modeling)” (p. 123)
29. V-LINK button
The V-Link function is used to control external video
equipment, and this button turns it on and off. In addition,
you can also press [V-LINK] to call up a setting screen for V-
Link parameters.
“Controlling external video devices from the BR-1600CD
(V-LINK)” (p. 236)
30.
V-LINK REC (V-Link recording) button
If you are using the V-Link function to control external video
equipment, this button allows you to replay and/or playback
video-control operations.
“Controlling external video devices from the BR-1600CD
(V-LINK)” (p. 236)
31. ARRANGEMENT/PATTERN button
Use this button to switch between Arrangement mode and
Pattern mode for rhythm arrangements. For more detailed
information regarding these modes, refer to p. 148.
32. EDIT button
Used to input and set parameters for Drum, Bass, Loop
Phrase and rhythm arrangements (p. 145).
When [ARRANGEMENT/PATTERN] is lit up:
Press [EDIT] to call up a screen for creating rhythm
arrangements and editing the relevant parameters.
When [ARRANGEMENT/PATTERN] is not lit:
Press [EDIT] to call up a screen for creating drum and/or
bass patterns and editing the relevant parameters.
33. TAP button
By tapping this button along with your song, you can set the
tempo for the Drum, Bass and Loop Phrases (p. 151).
34. V-TRACK button
Calls up a screen for selecting V-Tracks (p. 46).
35. TRACK MUTE button
If you hold down [TRACK MUTE] and press a track button
that is currently lit in green, the corresponding track will be
muted (or silenced) during playback. You can then perform
the same procedure once again to cancel muting. While a
track is muted, its track button will flash in green (Basic
Operation; p. 20).
• If a track being recorded is muted, the BR-1600CD will
automatically cancel muting when recording has ended.
• Track Mute is not enabled for tracks other than those
whose Track Type is set to AUDIO (p. 149). The Track
Mute is also cancelled with the track type is changed.
28
41
33
35
29
31
30 32
34
47
48
36
37
38
39
40
44
43
42
45
46
BR-1600_R_e.book 28 ページ ２００７年１２月６日 木曜日 午前９時５２分