Specifications, Before calling for service – Sharp XE-A102B User Manual

Page 28

Advertising
background image

26

Maintenance

• The display shows symbols that do not

make sense.

• The display will not illuminate even

when the mode switch is not set to “

”.

The machine fails to operate when any
key is pressed.

• The display is illuminated, but the

machine does not accept key entries.

• Journal paper does not feed properly in

the printer.

• Printing is faded or illegible.

• Was the machine reset in the proper way shown on

page 5?

• Is the power supplied to the electrical outlet? (Plug

in another electrical device.)

• Is the power cord firmly connected to the electrical

outlet?

• Is the mode switch properly set to the REG

position?

• Was the machine reset in the proper way shown on

page 5?

• Is the take-up spool installed properly?
• Is there a paper jam?

• Isn’t the ink roller used up?
• Is the ink roller installed properly?

Specifications

Problem

Item to check

Model:

XE-A102

Size:

330(W) x 363(D) x 234(H) millimeters

Weight:

5 kg

Power Source:

Official (nominal) voltage and frequency

Power Consumption:

Stand-by: 6.4 W Operating: 13 W

Work Temperature:

0 to 40 °C

Display:

LED (Light-Emitting Diode) numeric display

Printer:

1 station print wheel selective type

Printing Capacity:

Max. 13 digits

Paper Roll:

Width:

57.5 mm ± 0.5 mm

Max. diameter: 80 mm
Paper quality:

Bond paper

(thickness: 0.06 to 0.085 mm, weight: 47 to 64 g/m

2

)

Cash Drawer:

3 slots for bills, 6 for coins

Accessories (supplied): Paper roll

1 roll

Mode key

2

Drawer lock key

2

Instruction manual

1 copy (this manual)

Quick start guide

1 copy

Ink roller

1 (already installed)

Take-up spool

1

Fixing angle blacket

1

* Specifications and appearance are subject to change without notice.

If you encounter a problem, use this chart before calling for service.

Before Calling for Service

A102_01(E) 05.4.18 9:06 AM Page 26

Advertising
This manual is related to the following products: