Sharp GX-BT3 - Manual (Page 9)

E-8
Listening to Bluetooth enabled devices (continued)
■
Listening to the sound
Check that:
●
The source device Bluetooth functionality is ON.
●
Pairing of this unit and the source device is completed.
●
Unit is in connected mode (pairing indicator (BLUE) lights
up.)
1 Press the ON/STAND-BY button to turn the power on.
2 Press the BLUETOOTH button on the remote control or
FUNCTION button repeatedly on the main unit to select
Bluetooth function.
3 Start the Bluetooth connection from the Bluetooth
stereo audio source device.
4 Playback will start automatically, otherwise press play
(on remote control or source device).
Notes:
●
For various Bluetooth operations, refer “NFC con-
nection for audio playback” on page 6.
●
If the source device has an extra bass function or
equalizer function, set them to off. If these functions
are on, sound may be distorted.
Notes:
●
Make the Bluetooth connection again if the source device
is not turned on, or its Bluetooth functionality is off or is in
sleep mode.
■
To disconnect the Bluetooth device
Perform any of the followings.
- Disconnect the Bluetooth connection on the audio source
device.
Refer the operating manual supplied with the device.
- Turn off the Bluetooth stereo audio source device.
- Turn off this unit.
Note:
The volume of this unit may not be controlled as intended
depending on the device.
■ Auto power on
During Bluetooth standby mode, the unit will automatically
power on when the Bluetooth connection has been set up
between the main unit and your device.
Note:
This function is not applicable during Eco mode.