Sharp UP-3500 - Manual (Page 43)

42
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “1 READING” from the displayed menu.
The READING window will appear.
3.
Select “45 INLINE CONFIG” from the displayed menu.
(To display the hidden menu for reading, scroll the screen to the right or left using the right-pointing or
left-pointing arrow key down on the screen.)
The INLINE READING window will appear.
4.
Select “1 INLINE PRESET” from the displayed menu.
The PLEASE SELECT OUTPUT DEVICE. dialogue will appear.
5.
Select “1.DISPLAY” or “2.PRINT.”
If a receipt/report printer is not set up for the terminal, “1.DISPLAY” is the only valid choice.
Sample Print (master)
Sample Print (satellite)
Terminal number of the master
MWS port no.
Terminal number of the satellite
MWS port no.
System retry function (enable/disable)
List of the machines involved in the IRC system
(terminal no. and machine no.)
Back-up master (terminal no. and machine no.)
The machine from which the PLU/EAN code is searched first
The machine from which the
PLU/EAN code is searched first
System retry function (enable/disable)
NOTE
7. Reading the contents of the IRC programming – master and satellite