Sharp LC-60UD20KN - Manual (Page 18)

16
Daily operation
Switching on/off
Turning on/off the power
Press a on the TV or >a on the remote control
unit.
Standby mode
From standby, press a on the TV or >a on the
remote control unit.
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV
is turned off.
Switching between digital, satellite
and analogue broadcasts
Watching digital
broadcasts Watching analogue
broadcasts
Watching satellite
broadcasts
NOTE
• If multiple satellite services are set, each time you press
the SAT button the channel switches as follows.
SAT1 SAT2
SAT3 SAT4
Changing channels
With :r/s With 0 _9
Selecting an external video source
Once the connection is made, press b to display
the “INPUT” screen, and then press b or a/b to
switch over to the appropriate external source with
;.
TV
INPUT
Switchable
CH list
NOTE
• You can also select an external video source from
“HOME” > “Input change”.
• Only HDMI inputs which are not set for “Input skip”
(Page 44) and properly connected inputs can be selected.
Watching TV