Sharp LC-60UD20KN User Manual

Page 65

Advertising
background image

63

Wireless installation

This TV is equipped with a wireless LAN function.

E

Wireless connection overview

n

PC

o

Wireless LAN router/access point

p

Wireless LAN LCD TV

q

Network

NOTE

• When using the SHARP wireless LCD TV, try to

provide as much free space around the device for best
performance.

• Make sure the firewalls in your network allows access to

the TV wireless connection.

• Operations cannot be guaranteed when used with

access points that do not have Wi-Fi® certification.

• A wireless LAN access point is required to connect

the TV to the Internet using a wireless LAN. See the
operation manual of your access point for setup.

E

How to connect

1

Switch on your router before starting the
network installation.

2

Go to “Network setup” > “Auto setup”, and then
press

;.

NOTE

• Follow the on-screen instructions when setting

manually.

Go to “Network setup” > “Manual setup”.

3

Press

a/b to select “Wireless”, and then press

;.

4

Confirm the WPS location and then press

; to

go to the next step.

5

Perform “Connection test” after the connection
is completed. Press

c/d to select “Yes”, and

then press

;.

6

The connection test result will be displayed on
the screen. Follow the on-screen instructions for
the settings after this step.

NOTE

• When not using “Push button”, perform the settings

from “Network setup” > “Manual setup” > “Connection
type”.

• To connect your TV to the internet, you must have a

broadband internet connection.

• If you do not have a broadband internet connection,

consult the store where you purchased your TV or ask
your internet service provider or telephone company.

• There is no need to enter the security key for

subsequent connections to the wireless network.

• If your access point is set to a stealth mode (that

prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.

• If you want to change the IP settings manually, go to

“Network setup” > “Manual setup” > “IP” setup” and
follow the on-screen instructions and the operation
manual of the router.

Network setup

Advertising
This manual is related to the following products: