Bradley Smoker WS-1X - Manual (Page 4)

WS-1X Installation
4 4/2/07 Bradley Corporation • 215-1441 Rev. C; EN 07-304
6-1/2"
(165mm)
6-5/8"
(168mm)
6-1/2"
(165mm)
3/4"
(19mm)
4 "
(102mm)
3 "
(76mm)
SHOWER #10-24 SCREW
(160-138)
(4) PLACES
Position the shroud mounting
bracket (140-904) on the wall
above the shower. Secure the
bracket to the wall with 1/4"
fasteners (wall anchors and
fasteners supplied by installer).
A
Position the slip ring (186-1358)
against the wall at the ceiling
and in line with the shroud
bracket. Secure the slip ring to
the wall with 1/4" fasteners.
B
Position the shroud and
secure with the fasteners
provided. Using the holes in
the top of the shroud as a
template, drill and tap #10-24
holes in the slip ring with a
.149 drill bit. Secure the
shroud to the slip ring.
C
CEILING LINE
Vertical Shroud
Installation
Secure the brackets to the wall with
1/4” diameter fasteners (wall anchors
and fasteners supplied by installer).
A
Using the horizontal shroud as a
guide, secure the slip ring to the
wall with 1/4" diameter fasteners.
B
Using the shroud as a template,
drill and tap #10-24 holes in the
slip ring with a .149 drill bit.
C
CORNER LINE
Horizontal Shroud
Installation