Sharp AY-XPC9JR - Manual (Page 10)

GB-8
Press the PROGRESSIVE AIRFLOW button
during cooling or dry operation when you do not
want to feel cold air. Vertical adjustment louvre
is set obliquely upward to deliver cool air to the
ceiling.
Press the button during heating operation.
Vertical adjustment louvre is set downward to
deliver the warm air down to the fl oor and warm
you.
1
During operation, press the
PROGRESSIVE AIRFLOW button.
• The remote control will display “ ”.
TO CANCEL
Press the PROGRESSIVE AIRFLOW button
again.
NOTE:
• The PROGRESSIVE AIRFLOW setting is
cancelled when you press FULL POWER button
while PROGRESSIVE AIRFLOW is set.
• If you want PROGRESSIVE AIRFLOW operation
in FULL POWER mode, press PROGRESSIVE
AIRFLOW button during FULL POWER operation.
In this operation, the air conditioner works at the
maximum power to makes the room cool or warm
so rapidly that you can use it just after you come
home.
1
To activate the FULL POWER operation,
press the FULL POWER button during
operation.
• The remote control will display “ ”.
• The temperature display will go off.
• The green FULL POWER lamp ( ) on
the unit will light up.
TO CANCEL
Press the FULL POWER button again.
• FULL POWER operation will also be cancelled
when the operation mode is changed, or when the
unit is turned off.
• The green FULL POWER lamp ( ) on the unit
will turn off.
NOTE:
• You can not set the temperature or fan speed
during the FULL POWER operation.
PROGRESSIVE AIRFLOW FULL POWER OPERATION
1
1