Neff B46E74N3GB - Manual (Page 8)

8
When inserting the baking tray or the universal pan, check
■
that the lug (a) is in the rear part of the of the accessory
■
that the sloping edge of the accessory faces towards the
appliance door when it is inserted
Shelf positions
The cooking compartment has four shelf positions. The shelf
positions are counted from the bottom up.
The pull-out rails lock in place when they are fully pulled out.
This makes it easy to place the accessories in position. To
unlock the pull-out rails, push them back into the cooking
compartment by applying a certain degree of force.
:
Risk of burns!
The telescopic shelves become hot when the appliance is in
use. Take special care not to get burnt when they are pulled
out.
The individual shelf units can be inserted into your preferred
shelf positions. This simple insertion system allows flexible and
quick handling when changing shelves.
Note: Do not use shelf height 2 when baking and roasting
with CircoTherm®. This will adversely affect air circulation and
your baking and roasting results will not be as good.
Optional accessories
You can obtain further accessories from specialist retailers:
Before using the appliance for the first time
In this section, you can read about
■
how to set the language
■
how to set the time
■
How to clean your appliance before using it for the first time
Setting the language
Once the appliance has been connected to the power supply,
you must set the language for the text display.
1. Turn the temperature selector until the language you require
appears on the text display.
2. Press and hold the ± info button for 3 seconds.
Your setting is saved.
Changing the language
Your appliance must be switched off.
1. Press and hold the ± info button for 3 seconds.
This takes you directly to the language selection screen.
2. Turn the temperature selector until the language you require
appears on the text display.
3. Press and hold the ± info button for 3 seconds.
Your setting is saved.
Setting the clock
Note: When you press the KJ clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
‹ : ‹‹ flashes in the clock display.
1. Briefly press the KJ clock function button to go to the
setting mode.
The
KJ and 3 symbols light up. ‚ƒ : ‹‹ appears in the
clock display.
2. Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
D
D
Accessories Order no.
System steamer N8642X3
Grill set Z1240X2
Glass pan Z1262X0
Extra-deep pan, enamelled Z1272X0
Baking tray, non-stick Z1343X0
Roasting tray, enamelled, two-piece Z1512X0
VarioCLOU® telescopic shelf with full exten-
sion
Z1785X3
6SUDFKHZlKOHQ
'HXWVFK