Opening the appliance door during operation, Changing the temperature or cooking time, Changing the microwave power setting – Neff C57M70N3GB User Manual
Page 10: Cancelling operation, Note, Pausing operation, 1, 2, 3 series of operations, Can be used with, Ovenware, Setting a series of operations
10
Opening the appliance door during operation
Operation is suspended. The cooling fan may continue to run.
After closing the door, press the
ƒ
button. Operation will then
continue.
Changing the temperature or cooking time
Use the temperature selector or rotary selector to change the
cooking time or temperature.
Changing the microwave power setting
Press the button for the new microwave power setting. Use the
rotary selector to set the cooking time and restart.
Cancelling operation
Press the illuminated button for the set microwave power
setting. Make new settings or switch off the appliance.
Note: If you open the appliance door during cooking, the fan
may continue running.
Pausing operation
Open the appliance door or briefly press the
„
button.
Microwave operation is interrupted. Press the
ƒ
button again
once you have closed the door. Operation will then continue.
1, 2, 3 series of operations
You can use the series of operations function to set up to three
different consecutive settings and then start.
In this section, you can find out how to set a series of
operations.
Can be used with:
■
all microwave power settings
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
The operating mode selector must not be pushed in.
1.
Press the
°±²
button.
The
°
for the first operation in the series lights up.
2.
Set the first microwave power setting and cooking time.
3.
Press the
°±²
button again.
The
±
for the second operation in the series lights up.
4.
Set the second microwave power setting and cooking time.
5.
Press the
°±²
button again.
The
²
lights up for the third operation in the series.
6.
Set the third microwave power setting and cooking time.
7.
Press the
ƒ
button.
The operation starts. In the clock display, the total cooking time
is displayed and the currently activated operation is lit.
The cooking time has elapsed
A signal sounds. The series of operations is finished. To stop
the signal, press the
„
button. Switch off or reset the
appliance.
Opening the appliance door during operation
Operation is suspended. The cooling fan may continue to run.
After closing the door, press the
ƒ
button. Operation will then
continue.
Changing the setting
Changes can only be made before operation begins. Press
the
°±²
button to go to the desired setting, and make the
changes.
Cancelling operation
Press the illuminated button for the set microwave power
setting. Make new settings or switch off the appliance.
Pausing operation
Press the
„
button briefly. Microwave operation is interrupted.
Press the
ƒ
button to continue the operation.
Note: You can also combine an operating mode with the Series
of operations function. First, set the series of operations.
Electronic clock
Your appliance has various clock functions.
In this section, the following are explained:
■
The clock display
■
how to set the timer
■
how your appliance is automatically switched off (cooking
time)
■
how to set or change the clock.
Clock display
Clock function
Use
Q
Timer
You can use the timer as an egg timer or a
kitchen timer. The appliance does not
switch on or off automatically
&ORFNIXQFWLRQEXWWRQ
5RWDU\VHOHFWRU