Replacing the glass cover, After-sales service, E number and fd number – Neff C57M70N3GB User Manual

Page 15: To book an engineer visit and product advice, Technical data, Automatic programmes, Setting a programme, Press the n button

Advertising
background image

15

6.

Screw the lamp cover in place.

Reassemble the appliance in the reverse order.

7.

Switch the circuit breaker in the fuse box back on or plug in

the mains plug.

Replacing the glass cover
If the glass cover in the oven is damaged, it must be replaced.

You can obtain covers from the after-sales service. Please

supply your appliance's E number and FD number.

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate bearing these numbers can

be found in the oven. You can make a note of the number of

your appliance and the telephone number of the after-sales

service in the space below to save time should it be required.

Please note that there will be a fee for a visit by a service

technician in the event of a malfunction, even during the

warranty period.
Please find the contact data of all countries in the enclosed

customer service list.

To book an engineer visit and product advice

Trust the expertise of the manufacturer, and rest assured that

the repair will be carried out by trained service technicians

using original spare parts for your domestic appliance.

This appliance corresponds to the standards EN 55011 and

CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the purpose

of heating food. Class B states that the appliance is suitable for

private households.

Technical data

Automatic programmes

The automatic programmes enable you to prepare food very

easily. You select the programme and enter the weight of your

food. The automatic programme makes the optimum setting.

You can choose from 15 programmes.

Setting a programme

Once you have selected a programme, make settings as

follows.
Requirement: the operating mode selector must not be pushed

in.
Example in diagram:

Programme 2 with a weight of 1 kilogramme.

1.

Press the

n

button.

The first programme number appears on the temperature

display.

E no.

FD no.

After-sales service

O

GB

0844 8928989

Calls from a BT landline will be charged at up to

3 pence per minute. A call set-up fee of up to 6 pence

may apply.

IE

01450 2655

0.03 € per minute at peak. Off peak 0.0088 € per

minute.

Power supply

220 - 240 V, 50 Hz

Maximum total connected load

3100 W

Microwave power setting

1000 W (IEC 60705)

Grill output power

2000 W

Hot air output power

1950 W

Microwave frequency

2450 MHz

Fuse

15 A

Dimensions (HxWxD)
­ appliance

454 x 595 x 563 mm

­ cooking compartment

236 x 445 x 348 mm

VDE approved

yes

CE mark

yes

Advertising
This manual is related to the following products: