Keeping the appliance clean, Self-cleaning surfaces, Caution – Neff U15M52N3GB User Manual

Page 20: Oven cleaning, Risk of burns, Preparing for oven cleaning, Starting oven cleaning, Set the temperature selector to z oven cleaning, Heat the appliance for 60 minutes, Note

Advertising
background image

20

Keeping the appliance clean
To avoid getting the cooking compartment dirty,

clean the cooking compartment after each use, as dirt will

bake on the next time it is heated up, and this can only be

removed with difficulty

always remove flecks of limescale, grease, starch and

albumin (e.g. egg white) immediately

use

3

CircoTherm® whenever possible. This operating

mode creates less dirt

Use the universal pan to bake very moist cakes

use suitable ovenware when roasting (e.g. roasting dish) or a

roasting sheet (see section: Accessories)

Self-cleaning surfaces

The rear wall, ceiling and side walls of the cooking

compartment are coated with self-cleaning enamel. This

coating absorbs and disintegrates splashes from baking and

roasting while the oven is in operation.
Large splashes only disappear after the oven has been used

several times.
Discolouration on the self-cleaning surfaces does not affect the

self-cleaning function.

Caution!
Damage to surfaces on self-cleaning areas due to applying

oven cleaner.Never clean the self-cleaning surfaces with oven

cleaner.
If oven cleaner accidentally gets onto self-cleaning surfaces,

remove it immediately with a sponge and plenty of water.

Caution!
Damage to surfaces on self-cleaning areas due to the use of

abrasive and acidic cleaning agents and aids.
Do not use cleaning agents containing abrasive substances or

acids.
Do not use abrasive cleaning aids such as steel wool or

scourers.

Oven cleaning

If the self-cleaning surfaces (see section: Self-cleaning

surfaces) in the oven no longer clean themselves adequately,

they can be regenerated using the

z

Oven cleaning operating

mode.

:

Risk of burns!

The appliance becomes very hot during Oven cleaning. Keep
children away from the appliance.

Preparing for oven cleaning

1.

Remove accessories and hook-in racks, telescopic shelves

or separate fitting systems from the cooking compartment.

2.

Clean the enamel surfaces (smooth surfaces) to avoid any

lasting stains (see section: Cleaning the cooking

compartment).

Starting oven cleaning

1.

Main oven

õ

: Set the operating mode selector to

3

CircoTherm®.
or
Top oven

ô

: Set the operating mode selector to

%

Top/

bottom heat.

2.

Set the temperature selector to

z

Oven cleaning.

3.

Heat the appliance for 60 minutes.

Note: You can also set the cooking time clock function to

60 minutes.

Ending/cancelling oven cleaning
Turn the operating mode and temperature selector back to

the

Û

position.

Appliance part

Cleaning agent/aid

Enamel surfaces

(smooth surface)

To facilitate cleaning, you can switch on the interior lighting and detach the appliance

door if necessary.
Apply commercially available washing-up liquid or a vinegar solution with a soft, damp

cloth or chamois; dry with a soft cloth.
Soften baked-on food residues with a damp cloth and detergent.
We recommend using oven cleaner if the oven is very dirty. Observe the manufac-

turer's instructions when cleaning with an oven cleaner.
Leave the cooking compartment open to dry after cleaning.

Self-cleaning surfaces

(rough surface)

Please see the notes in section: Self-cleaning surfaces

Door seal

Hot soapy water

Hook-in racks

Hot soapy water:

Soak and clean with a dish cloth or brush.

Telescopic shelves

Hot soapy water:

Clean with a dish cloth or a brush.
Do not remove the lubricant while the pull-out rails are pulled out – it is best to clean

them when they are pushed in.
Do not soak or clean in the dishwasher.

Accessories

Soak in hot soapy water, clean with a brush and sponge or wash in the dishwasher.

Advertising
This manual is related to the following products: