Neff B16P52N3GB - Manual (Page 10)

10
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the Û position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off.
1. Press and hold the ± info button for 3 seconds to go to the
basic settings menu.
The text display shows "Select language: German". If the
appliance controls are locked, you must unlock them first.
2. Press the ± info button repeatedly until the current basic
setting for the relevant submenu is displayed on the text
display (e.g. "Audible signal off").
3. Using the temperature selector, set the required basic setting
within a submenu (e.g. "Audible signal 2 minutes").
4. Press and hold the ± info button for 3 seconds.
Your basic setting is saved.
You can change the following basic settings:
Automatic safety cut-out
The automatic safety cut-out is only activated if you have not
made any settings on your appliance for a prolonged period.
You can adjust the period of time after which your appliance
shuts off.
"Safety cut-out" appears in the text display and
‹‹‹ flashes in
the temperature display. Appliance operation is interrupted.
Turn the operating mode selector to the
Û position to
deactivate it.
Electronic clock
In this section, you can read about
■
how to set the timer
■
how to switch your appliance off automatically (cooking time
and end of operation)
■
how to switch your appliance on and off automatically (preset
operation)
■
how to set the time
■
find out how to activate rapid heat up
Clock display
Temperature
display
Text display Meaning
• Residual heat
high
Residual heat high
(above 120 °C)
œ Residual heat
low
Residual heat low
(between 60 °C and 120 °C)
$ %
Basic settings menu
Submenu
Basic setting Setting
symbol
Childproof lock Appliance controls
unlocked
™‚‹
Appliance controls locked ™‚‚
Appliance permanently
locked
™ƒ‚
Audible signal Audible signal off ™„‹
Audible signal 30 seconds ™„‚
Audible signal 2 minutes ™„ƒ
Audible signal 10 minutes ™„„
&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU
Clock function Use
Q Timer You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
x Cooking time The appliances switches off automatically after a cooking time setting has elapsed
(e.g. ‚ : „‹ hours)
y End of operation The appliance switches off automatically at a set time (e.g. ‚ƒ : „‹ )
Preset operation The appliance switches on and off automatically. Cooking time and end of operation
have been combined.