Whirlpool WGD98HEBU - Manual (Page 6)

6
MY CYCLE
SPECIALTY
CYCLES
TIMED
DRY
QUICK
DRY
Steam Cycles
QUICK REFRESH
Select number of Garments
NORMAL
DELICATE
CASUAL
TOWELS
HEAVY
DUTY
JEANS
BULKY ITEMS
ENHANCED
TOUCH UP
Manual Cycles
Eco Auto
Cycles
CONTROL PANEL AND FEATURES
POWER BUTTON
Press to turn the dryer on and off. Press to stop/cancel
a cycle at any time.
NOTE: When the dryer is turned on for the first time after
being plugged in or after a power outage, please allow a
minute or so for the dryer display to start up.
START/PAUSE BUTTON
Press and hold to start a cycle, or press once while a cycle
is in process to pause it.
WRINKLE SHIELD ™ with Steam Option
Press to activate the Wrinkle Shield ™ with Steam option.
This will tumble clothes periodically and, if the Steam
option is activated, add a short steam refresh cycle after an
hour to help avoid wrinkles when you can’t remove clothes
from the dryer immediately. Steam is available with High,
Medium-High, and Medium temperatures only.
COLOR LCD DISPLAY SCREEN
This screen will display current options and settings, cycle
information, and estimated time remaining. You can also
use the navigation buttons below and on either side of the
screen to access helpful laundry and troubleshooting tips,
as well as other information.
SYSTEM SETTINGS
The System Settings button allows you to adjust the LCD
display settings, including brightness and other preferences.
Under System Settings, you can access the following
functions:
Remote Start (model WEL98 only)
Allows you to start your dryer remotely using the
Smartappliances app.
Control Lock
Allows you to disable all controls except the power button
to avoid unauthorized use or changes to running cycles.
End of Cycle
Adjusts the volume of the End of Cycle signal, or turns
it off.
Button Sound
Adjusts the volume of the button sounds, or turns
them off.
Brightness
Adjusts the brightness of the LCD screen.
Language
Displays information in English, French, or Spanish.
Themes
Select between two different display color and
background themes.
6 9
1
2
3
5
LCD CONTROLS
Use these buttons to select options displayed in the LCD
screen, and to navigate through options.
BACK
Press the BACK button to go back to the previous
screen without accepting any changes made on the
current screen. Press and hold for 1 second to return
to the start-up screen for the selected cycle.
MORE INFO
Press to get more information on a setting or option.
Press MORE INFO again to return to the previous
screen.
t
and u BUTTONS
t Button
Press the t button when the arrow is lit to go back
to the previous set of options or settings.
u
Button
Many screens have more than 4 selections.
Press the u button when the arrow is lit to show
additional options or settings.
SELECTION BUTTONS
Use the four selection buttons to choose options or
settings displayed on the LCD screen.
ECOBOOST ™ BUTTON
The EcoBoost ™ option improves energy savings. You may
notice the cycle time increases when the EcoBoost ™ option
is selected. Saving energy through slightly lower temperatures
requires slightly more drying time for best drying results. Overall,
you are saving more energy when using the EcoBoost ™ feature.
NOTE: Press and hold the EcoBoost ™ button for 3 seconds
to turn the drum light on or off.
CYCLE CONTROL KNOB
Use your dryer’s cycle control knob to select available
cycles on your dryer. Turn the knob to select a cycle
for your laundry load. See “Cycle Guide” for detailed
descriptions of cycles.
STATIC REDUCE BUTTON
Press to add the Static Reduce option to an Auto cycle.
The dryer will automatically tumble, pause, and introduce
a small amount of moisture into the load to help reduce
static. This option adds approximately 8 minutes to the
total cycle time.
or
SMART GRID BUTTON
Press to activate the Smart Grid option (see “Smart
Feature Sheet”).
8 7
3 4 2 1
4
5
6
7
8
9
or