Belkin ScreenCast AV4 - Manual (Page 17)

15
sCReenCasT aV seTTInGs
naming/Renaming Transmitters
ScreenCast AV can support up to eight transmitters. So in addition
to the 4-port AV transmitter that came with this product, you might
add other ScreenCast AV transmitters. For example, you might
have a transmitter for your laptop, and another one for a tablet.
Regardless of if you have one transmitter or many, you may find it
useful to choose a different name for one of them. Keep in mind that
a transmitter name is different from a video source name. There are
1 to 4 video sources per transmitter.
To name or rename a transmitter, go to the Settings menu and
select “Rename a transmitter.”
You will now have the opportunity to select a new name for your
transmitter from a pre-populated list of common transmitter names.
You will then see the screen below, which will show you a list of the
transmitters that have been connected to your receiver. Select the
transmitter you wish to rename and then select “OK” on the remote.