Belkin ScreenCast AV4 - Manual (Page 18)

adding/Deleting a Transmitter
ScreenCast AV is part of the WHDI ™ family, so it is possible to
connect a variety of other ScreenCast transmitters to your
ScreenCast AV receiver.
Some of those transmitters have a single video source, while
others have multiple sources. When a transmitter gets added, all
of its sources get added to the list of sources to choose from on
the main on-screen display (the one used for switching sources).
Transmitters will vary in terms of capabilities, so please refer to
the manufacturer info for details on how they would work with your
ScreenCast AV receiver.
Using your ScreenCast AV remote, use the menu button to open up
the menu screen and navigate to the “Settings” section; you will see
the screen below.
adding a Transmitter
In the Settings menu, select “Add or Delete a transmitter.” On the
screen that shows next, you will choose “Add a transmitter.”
Next you’ll be instructed on how to connect the new transmitter.
Press the Pair button on the receiver and then press the Pair button
on the new transmitter; the process is similar to how a Bluetooth ®
headset connects to a mobile phone. The transmitter and receiver will
exchange information and create a secure connection with each other.
Pairing could take up to 60 seconds.
16
sCReenCasT aV seTTInGs