Brother HL-1230 EN - Manual (Page 24)

CHAPTER 1 ABOUT THIS PRINTER
1-15
Ready
Alarm
Paper
Toner
Data
Drum
2.
Send the print data to the printer.
✏ Note
3
A “NO PAPER” message is shown in the Status Monitor and control panel LEDs
until you insert a sheet of paper into the manual feed slot.
4
3.
Using both hands, slide the manual feed slot paper
guides to the paper width to be used.
4.
Using both hands, insert the paper into the
manual feed slot until the front edge of the
paper touches the paper feed roller. Hold the
paper in this position until the printer
automatically feeds the paper in a short
distance, and then let go of the paper.
✏ Note
5
Insert the paper into the manual feed slot with the side to be printed (blank side)
face up.
5.
After the printer ejects the printed page, insert the next sheet of paper as in Step 4
above. The printer will wait until you insert the next sheet of paper. Repeat this as
necessary for the number of pages you need to print.