Brother HL-1230 EN - Manual (Page 89)

CHAPTER 6 TROUBLESHOOTING
6-3
Error message Action
RESOLUTION ADAPTED
(The printer has printed
the document at a reduced
resolution.)
• Reduce the complexity of your document before you print to
prevent automatic reduction of the resolution.
(For HL-1440, HL-1450 and HL-1470N Users)
• Expand the printer memory by adding a commercially available
SIMM memory. See “Installing Additional Memory” in Chapter
4.
TONER EMPTY • See
“Replacing the Toner Cartridge” in Chapter 5.
TONER LOW • Purchase a new toner cartridge and have it ready for when the
Toner Empty status is indicated.
FUSER MALFUNCTION • Turn the power switch off, wait a few seconds and then turn it
on again.
• Leave the printer for 10 minutes with the power on. If the error
occurs again, consult your dealer.
LASER BD
MALFUNCTION
SCANNER MALFUNCTION
D-RAM ERROR
NV-RAM ERROR
MAIN MOTOR ERROR
ENGINE INTERFACE
ERROR
• Turn the power switch off, wait a few seconds and then turn it
on again. If the error occurs again, consult your dealer.