Brother HL-1230 EN - Manual (Page 95)

CHAPTER 6 TROUBLESHOOTING
6-9
5.
Open the rear cover. Pull the jammed paper out of
the fuser unit.
✏ Note
0
If you have to pull the paper toward the back of the printer, the fuser may get dirty
with toner powder and it may scatter on the next printouts. Print a few copies of the
test page until the scattering of toner stops.
6.
Close the rear cover.
7.
Install the drum unit assembly.
8.
Install the paper cassette in the printer.
9.
Close the front cover.