Brother HL-1230 EN - Manual (Page 38)

CHAPTER 1 ABOUT THIS PRINTER
1-29
™ Manual Duplex Printing from the Manual Feed
Slot
!
Caution
• Before re-inserting the sheets, you will have to straighten them, or you may get
paper feed errors.
• The use of very thin or very thick paper is not recommended.
• When you use the Manual Duplex function, it is possible that paper jams may
occur or print quality might not be satisfactory. If a paper jam occurs, see
“Paper Jams and How to Clear Them” in Chapter 6.
1.
Select the required manual duplex printing mode and manual feed mode from the
driver.
2.
Using both hands, insert the paper into the
manual feed slot with the side to be printed
first facing up. Follow the instructions on the
computer screen. Repeat this step until you
have printed all the even numbered pages.
3.
Remove the printed even numbered pages from
the output tray and re-insert them in the same
order into the manual feed slot. Load the paper
with the side to be printed (blank side) face up.
Follow the instructions on the computer screen.
4.
Repeat Step 3 until you have printed all the odd numbered pages on the reverse
side of the paper.