Maintenance – Whirlpool AKP 461 WH User Manual

Page 6

Advertising
background image

GB4

REMOVING THE DOOR

To remove the door:

1.

Open the door fully.

2.

Lift the catches and push them forwards as far as they will go (Fig. 1).

3.

Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (Fig. 2).

To refit the door:

1.

Insert the hinges in their seats.

2.

Open the door fully.

3.

Lower the two catches.

4.

Close the door.

MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)

1.

Remove the side accessory holder grilles (Fig. 3).

2.

Pull the heating element out a little (Fig. 4) and lower it (Fig. 5).

3.

To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest on the lateral
supports.

MAINTENANCE

WARNING

-

Use protective gloves.

-

Ensure the oven is cold before carrying out the following operations.

-

Disconnect the appliance from the power supply.

Fig. 1 Fig. 2

Fig. 3 Fig. 4 Fig. 5

Advertising