BT 4000 Classic - Manual (Page 43)

Diverse 4000 Classic ~10th Edition ~ 19th September ’01 ~ 4167
41
To switch temporarily from
pulse to tone dialling
If you are using pulse dialling with
your switchboard but need tone
dialling to use certain functions on
your Diverse 4010 you can switch to
tone dialling during the call.
During the call:
Press the MENU button.
Press the DOWN button
until the display shows
TEMP TONE
.
Press the OK button.
Tone dialling is now active.
Please note
This setting is only for the duration
of the call.
To set a pause before dialling
You can insert a pause to allow your
switchboard time to get a line
before your Diverse 4010 dials the
number.
Press the MENU button.
Press the 8 button.
Press the 9 button.
Press the 1 button.
Press the 6 button.
Enter the pause length:
1 = 1 second
2 = 3 seconds
3 = 7 seconds
4 = 2.5 seconds
Setting pauses
MENU
OK
MENU
8
TUV
9
WXYZ
1
6
MNO
GENERAL
INFORMA
TION
Please note
If you want to insert a pause into
a telephone number you are storing
in your directory, start storing the
number (see page 16) and where
a pause is needed, press and hold
the button.
A‘ P ’ will appear in
the number.
R