Brother FAX 870MC - Manual (Page 60)

50
C H A P T E R S I X
■ Press Resolution (before you send the fax) to select the resolution for the
document you’re sending.
■ DO NOT use curled, wrinkled, folded or ripped paper, or paper with
staples, paper clips, paste or tape attached. DO NOT use cardboard,
newspaper or fabric.
■ Make sure documents written with ink are completely dry.
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving
tones before sending the fax.
1 Insert the document face down in the feeder.
2 Pick up the handset and listen for a dial tone
—OR—press
Hook or Speaker Phone and listen for a dial tone.
3 Enter the fax number you want to call (you can enter the digits using the
dial pad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-index).
4 When you hear the fax tone, press Start .
5 If you’re using the handset, hang up.
Automatic Transmission
This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset,
or press
Hook or Speaker Phone .
1 Insert the document face down in the feeder.
2 Enter the fax number from One Touch, Speed Dial, Tel-index or the dial pad.
3 Press Start .
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to retry
the number.
If you’re sending a fax automatically and the line is busy, the FAX/MFC
will redial automatically up to three times at 5 minute intervals.
See
Speed Dialing
p. 68
See
One-Touch
Dialing
p. 68
See
Resolution
p. 55