Blomus PURE LIFE 65330 - Manual (Page 12)

12 Owner’s manual/Installation instructions
Í
65330 max. 1 litre (33.8 fl.oz)
65331 max. 2 litre (67.62 fl.oz)
65333 max. 2 litre (67.62 fl.oz)
Unit No.
4. Fit the burner cover onto
the opening. Make sure the
brushed side faces up.
5. Check that the lever ope-
rates the flame regulator so
it slides smoothly, and opens
and closes completely.
6. Carefully fit the two glass
sections into the two slots
provided. Make sure the
rounded edges face up.
7. Unit 65333: Carefully fit the four glass sections into
the four slots provided. Make sure the rounded edges
face up.
8. Assembly is complete if the burner cover fits tightly
into the opening and the opening and closing mechanism
works smoothly and completely.
6. Operating the fireplace
WARNING! Risk of suffocation!
Make sure there is sufficient ventilation while the pro-
duct is in use (open windows). Refer to paragraph 3. If
you exper-ience sudden fatigue and lack of concentra-
tion, it may indicate a possible lack of oxygen.
6.1 Filling the fireplace with bio-ethanol
WARNINGS! Risk of fires and burns!
Only use bio-ethanol. Refer to paragraph 1.1
In the very early and very late stages of burning the
flame may be of a blue colour, making the flame not
well visible. Always make sure that the flame is really
shut off and the burner has cooled down for at least 15
minutes before touching, filling or refilling the burner.
• Never pour ethanol into a flame or into the hot burner.
• Do not smoke, eat or drink when handling ethanol.
• Spilled ethanol must immediately be removed from any
surface to avoid ignition of the spilled liquid. Clean the
spot with water.
• Ethanol can leave marks on some surfaces such as
wood or paint. Please be careful not to spill ethanol.
Fill fireplace with bio-ethanol
VIDRO fireplace units: 65330, 65331 and 65333
Capacities of the burners
5. Assembly and mounting
5.1 Choosing the best place and surface to install
the fireplace.
Please check if the designated room and surface is suit-
able to operate the fireplace as follows:
• The room must have the minimum airspace volume as
detailed in paragraph 3.
• Check if the room has adequate ventilation openings
and consider the required air changes as detailed in pa-
ragraph 3.
• Position the fireplace on a suitable surface ensuring
that a minimum safety distance of 1 m (3.3 ft) from any
flammable material can always be maintained. Consider
also that curtains and drapes may wave when a window
is opened.
• 65333 ONLY: This unit with 4 glass screens can be
used with caution on a protected patio away from direct
sunlight. Use in mild weather with only a slight breeze.
• Is the designated surface heat resistant? Synthetic
flooring, wood, laminate, carpet, PVC, fabric or other
non heat resistant surfaces may not be suitable.
• The surface must be level.
• A table must be of sturdy construction and stand
squarely on the floor without any tendency to shake or
wobble. The fireplace should stand within the perimeter
of a table – it should not overlap the edge of the table.
• Is the surface strong enough? The filled fireplace
weights up to 20 kg (44 lb).
• Make sure that the surface including the fireplace can-
not be knocked over. If positioned on the floor make sure
the fireplace is not within the main walkways (risk of
stumbling).
5.2 Assembling the fireplace
VIDRO fireplace units: 65330, 65331 and 65333
DANGER! Risk of injuries!
Please be careful when mounting the glass.
1. Place the safety basin into the designated opening in
the fireplace body.
2. Place the burner into the
safety basin. Please make
sure it is arranged the right
way (see image).
3. Mount the flame regula-
tor with the brushed side fa-
cing up on the slide rails
located at each end of the
burner.