Belkin F1UP0001 - Manual (Page 26)

25 24
Web Configuration
25
WEB Interface – Encryption (64-bit manually)
This menu allows the user to enter keys for 64-bit encryption.
To set encryption for your Print Server:
•
WEP Mode: Select encryption mode from the drop-down menu.
• WEP Key: Select the appropriate Key number and enter hex digits into
all 20 fields consistent with your existing wireless network settings.
(Warning: Any inconsistencies with your network’s settings will cause the
Print Server not to connect to your wireless network).
• Authentication Mode: Default is “open + shared”, which operates with all
64-bit networks.
• Apply Changes: Click this button to complete your settings.
NOTE: After changing encryption settings, the Print Server must be restarted
(power-cycled) to reestablish communication with the network.
P74496uk_F1UP0001_man.indd 24 20/7/04 12:53:11 pm