Web configuration – Belkin F1UP0001 User Manual
Page 28
27
26
Web Configuration
27
WEB Interface – Encryption (128-bit manually)
This menu allows the user to enter keys for 128-bit encryption.
To set 128-bit encryption for your Print Server:
•
WEP Mode: Select encryption mode from the drop-down menu.
•
WEP Key: Enter hex digits into all 13 fields consistent with your existing
wireless network settings. (
Warning: Any inconsistencies with your
network’s settings will cause the Print Server not to connect to your
existing wireless network).
•
Authentication Mode: Default is “open + shared”, which operates with all
128-bit networks.
•
Apply Changes: Click this button to complete your settings.
NOTE:
After changing encryption settings, the Print Server must
be restarted (power-cycled) to reestablish communication with
the network.
P74496uk_F1UP0001_man.indd 26
20/7/04 12:53:13 pm