Belkin F1UP0001 - Manual (Page 31)

29 28
Web Configuration Web Configuration
29
se
ct
io
n
2
1
3
4
5
6
7
8
9
Web Interface – Upgrade Firmware
This menu allows the user to upgrade the Print Server’s firmware.
Before running this application, download the new firmware from the
Belkin website at www.belkin.com. Be careful to take note of the
location of the downloaded file on your computer’s hard disk. After
downloading, click “Browse” on the screen shown below, select the
file name of the downloaded firmware, then click “Apply Changes”.
The firmware upgrade will take a few minutes.
NOTE: Do not interrupt the process by removing power from the Print
Server or you could cause permanent damage to the device.
P74496uk_F1UP0001_man.indd 29 20/7/04 12:53:17 pm