Philips SHAVER Series 5000 afeitadora eléctrica en seco User Manual
Page 16
5
Fill the cleaning chamber with Jet Clean solution (HQ200) up to the
MAX indication.
Note: Make sure the cleaning chamber is always filled above the MIN
indication.
6
Place the Jet Clean System back onto the cleaning chamber (‘click’).
Make sure that the release buttons snap back into place.
Cleaning the trimmer with the cleaning brush
Clean the trimmer every time you have used it.
1
Switch off the shaver and disconnect it from the mains.
2
Push the trimmer slide downwards to open the trimmer.
3
Clean the trimmer with the short-bristled side of the cleaning brush.
Brush up and down along the trimmer teeth.
4
Close the trimmer (‘ click’).
Tip: For optimal trimming performance, lubricate the trimmer teeth with a drop
of sewing machine oil every six months.
English
16