Philips SHAVER Series 5000 afeitadora eléctrica en seco - Manual (Page 8)

Compliance with standards
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields (EMF) can be
safely cleaned under the tap.
general
- The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe low voltage of less than
24 volts.
Charging
It takes approx. 1 hour to fully charge the shaver.
When you charge the shaver for the first time or after a long period of
disuse, let it charge until the white battery lights up continuously.
A fully charged shaver provides up to 60 (PT927CC/PT927/ PT925/PT923/
PT923CC/PT920) or 50 shaving minutes (PT877/PT876/PT875/PT870).
The shaving time may be less than 60(PT927CC/PT927/PT925/PT923/
PT923CC/PT920) or 50 shaving minutes (PT877/PT876/PT875/PT870) as
a result of your shaving behaviour, your cleaning habits or your beard type.
Charge indications
Battery low
- When the battery is almost empty (when there are only 5 or fewer
shaving minutes left), the battery light starts to flash orange.
- When you switch off the shaver, the battery light continues to flash
orange for a few seconds.
Quick charging
- When you start charging the empty battery, the battery light flashes
white and orange.
Note: When the battery light flashes white and orange towards only white, you
can have a quick shave of three minutes.
Charging
- When the shaver is charging, the battery light flashes white.
English
8