Philips BEARDTRIMMER Series 7000 barbero con sistema de aspiración turbo - Manual (Page 14)

Problem Possible
cause
Solution
The
appliance
does not
trim as well
as it used to.
The hair-
collection
chamber is
full.
We advise you to empty the hair-
collection chamber after each trimming
session. When you cut long, dense
beards, it may also be necessary to
empty the hair-collection chamber
during the trimming session.
The hair-
collection
chamber or
the filter is
wet.
Both parts may only be cleaned dry. If
these parts become wet, dry them
carefully.
The flexible
hair guide in
front of the
cutting unit
jams.
The transparent hair guide needs to be
flexible to be able to adjust to the
contours of the face. If it jams because
hairs are stuck in it, remove the hairs
carefully with the brush supplied. The
flexible hair guide should yield at the
touch of a finger.
You do not
move
the appliance
in the optimal
direction.
For the best possible trimming and
suction performance, we advise you to
move the trimmer upwards, against the
direction of hair growth, making smooth
and gentle strokes. See chapter ‘Using
the appliance’.
English 14