Philips BEARDTRIMMER Series 7000 barbero con sistema de aspiración turbo - Manual (Page 12)

3 Shake the hairs out of the hair-collection chamber or remove them
with the cleaning brush supplied (Fig. 13).
appliance
1 Remove the comb attachment (Fig. 8).
2 Remove the cutting unit (Fig. 9).
3 Clean the cutting unit and the inside of the appliance with the
brush supplied. (Fig. 14)
4 Put the cutting unit and the comb attachment back onto the
appliance (‘click’) (Fig. 15).
replacement
Always replace a damaged or worn cutting unit or filter with an original
Philips cutting unit or filter, available at your dealer or at authorised Philips
service centres.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 16).
- The built-in rechargeable battery contains substances that may
pollute the environment. Always remove the battery before you
discard and hand in the appliance at an official collection point.
Dispose of the battery at an official collection point for batteries. If
you have trouble removing the battery, you can also take the
appliance to a Philips service centre. The staff of this centre will
remove the battery for you and will dispose of it in an
environmentally safe way. (Fig. 17)
removing the rechargeable battery
Do not connect the appliance to the mains again you have opened it.
Follow the steps below to remove the battery.
English 12