Philips BEARDTRIMMER Series 7000 barbero con sistema de aspiración turbo - Manual (Page 7)

Danger
- Make sure the adapter does not get wet.
Warning
- Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
- The adapter contains a transformer. Do not cut off the adapter to
replace it with another plug, as this causes a hazardous situation.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
caution
- Charge, use and store the appliance at a temperature between 15°C
and 35°C.
- Do not charge the appliance in a pouch or cassette.
- Do not immerse the appliance in water or any other liquid, nor rinse
it under the tap.
- Only use the adapter supplied.
- If the adapter is damaged, always have it replaced with one of the
original type in order to avoid a hazard.
- The adapter transforms 220-240 volts to a safe low voltage of less
than 24 volts.
- Do not use the appliance if the cutting element or the appliance itself
is damaged or broken, as this may cause injury.
- This appliance is only intended for trimming the human beard. Do
not use it for any other purpose.
Electromagnetic fields (EMF)
- This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
English 7