Beyonwiz FV-L1 - Manual (Page 59)

STB & PVR Function
52
 Recurrence: Set the recurrence of the recording (if any). Use the
LEFT/RIGHT buttons to select one of the following options;

Once: A one-off event with no recurrence (default setting).

Daily: Record every day.

Weekend: Record on Saturday and Sunday only.
 Weekday: Record from Monday to Friday only.
 Weekly: Record on the same day every week.

File Name: Set the file name of the recording. The default file name
is the name of the scheduled program as provided by the service
broadcaster or your service provider. To change the file name, press
OK to display the “Keyboard Input” pop-up window and enter your
desired name (see “On-screen Keyboard” section in Chapter 4).

Mode: Select the timer function. The default setting is “Record”,
where the program will be recorded to the HDD. If you would prefer
to automatically change service in order to view the program or
transfer it to an external recorder, use the LEFT/RIGHT buttons to
select “View”.

File Lock: You can lock the recording file to prevent unauthorised
access and deletion. Your 4-digit PIN access code will be required to
play or delete a locked file (see “Set PIN Number” section in Chapter
9). The default setting is “Unlock”. Use the LEFT/ RIGHT buttons
to select “Lock”.
 Auto Delete: You can set automatic deletion function to automatically
delete unwanted files that are older than the specified time. Use the
LEFT/RIGHT buttons to select one of the following options;

Never: Set not to delete.

After X days: Delete after days you set.
To save the settings for the timer, use the
UP/DOWN buttons to select
“Accept” and press OK. To cancel the timer, select “Cancel” and press
OK, or press EXIT.
NOTE
If the new timer overlaps two existing timers at the same time point a
recording conflict will occur (see “Timer Conflict” section later in this
chapter).