West Bend Back to Basics CC500 - Manual (Page 6)

6
OPERATION
Operation
Use and Care (assembly)
To use your Coffee Solution
TM
, begin by assembling the unit.
1. Place unit on a clean, fl at surface and plug into outlet.
2. For best possible taste, clean carafe and water reservoir before use.
See page 9.
3. To program clock and timer, see Other Features on page 8.
4. Remove carafe from unit and fi ll with desired amount of cold water.
Follow easy measuring marks to ensure correct amount of water.
Open lid and pour water into water reservoir. NOTE: The amount of
brewed coffee will always be less than the amount of water placed into
water reservoir; coffee grounds and the fi lter will absorb 10%.
5. With the lid still open, remove the fi lter basket. Place fi lter in the fi lter
basket. (Use quality disposable fi lters or use reusable fi lter provided.)
Measure one tablespoon (level) of drip or regular ground coffee for
each cup of coffee desired and place in fi lter. Be careful not to get any
grounds inside the unit.
6. Return fi lter basket with choice of fi lter to the unit and close lid. Do not
open lid during brewing cycle; leaving the lid down will preserve the
coffee’s fl avor and heat.
Carafe
Water Reservoir
Delay Brew Lever
Lid
Cord Storage
One-Hand
Dispensing Button
Warming Plate