West Bend Back to Basics CC500 - Manual (Page 8)

8
OPERATION/TIPS
ON/AUTO/OFF
PROG
HOUR
MIN
CLOCK
“AUTO LIGHT”
(GREEN)
“BREW LIGHT”
(RED)
Other Features
Clock and Programmable Timer
1. To program clock, plug in unit and press the “PROG” button once. The
word “CLOCK” will appear on the screen.
2. Press the “HOUR” button on unit to set hour with AM or PM as appears
on clock. Press the “MIN” button until time of day is reached.
3. To program timer, make sure clock is set to the correct time of day. Press
the “PROG” button a second time until the word “TIMER” appears on the
screen.
4. Use “HOUR” and “MIN” buttons to set desired brew time. When brew
time is reached, press “PROG” button to confi rm timer and to return to
time of day.
5. Push “ON/OFF” button twice until the “AUTO” light illuminated green. To
turn the program off, press “ON/AUTO/OFF” button once more, this will
return unit to programming mode.
6. If a new brew time is desired, repeat steps 3 & 4 above.
7. If the same brew time is desired for the next day, refi ll the water & coffee
then repeat step 5.
8. Re-programming the clock & times will be requested if unit is un-plugged.
Tips for general operation
• For best results, always clean unit after every use and use fresh, cold
water when brewing.
• Finer grinds will produce a fuller extraction and provide a richer, full-bodied
coffee while regular grinds will need more coffee per cup to produce the
strength of a fi ner grind.
• For stronger coffee, use more grinds; for weaker coffee, use less grinds.
• Grinding whole beans before use will produce optimum coffee.