Philips Flat TV - Manual (Page 68)

8
Sound adjustments
& Press H
, select Sound (
Ï
) and press
¬
.
The Sound menu is displayed:
é Use the îÏ
keys to select a setting and
the
Ȭ
keys to adjust.
“ Once the adjustments have been made, select
Store and press
¬
to store these changes.
‘ To quit the menus, press d
.
Description of the settings:
• Equalizer: to adjust the sound tone (from
bass: 120 Hz to treble: 10 kHz).
• Balance : this balances the sound on the left
and right speakers.
• Delta Volume: this is used to compensate
any volume discrepancies between the
different programs or EXT sockets.This
setting is available for programs 0 to 40 and
the EXT sockets.
• AVL (Automatic Volume Leveller): this is
used to limit increases in sound, especially on
program change or advertising slots.
• Dolby Virtual:To activate / deactivate the
surround sound effect.You can also access
these settings with key
t
.
• Store: this is used to store the sound settings.
Feature settings
& Press H
, select Features (
Ï
) and press
¬
.
You can adjust:
é Timer : see next page
“ Contrast +: automatic adjustment of the
picture contrast which permanently sets the
darkest part of the picture to black.
‘ To quit the menus, press d
.
TV Menu
Picture
Sound
Features
Install
Mode
Sound
Equalizer Æ •
Balance Æ •
Delta Volume Æ •
AVL Æ •
Dolby Virtual Æ •
Store Æ •
120 Hz
500 Hz
1500 Hz
5 KHz
10 KHz
Timer function
This menu lets you use the TV set as an alarm.
& Press the H
key.
é With the cursor, select the Features menu
then Timer :
“ Sleep: to select an automatic standby period.
‘ Time: enter the current time.
Note: the time is updated automatically each time
the TV set is switched on via the teletext information
on programme 1. If this program does not have
teletext, the update will not take place.
( Start Time: enter the start time.
§ Stop Time: enter the standby time.
è Program No.: enter the number of the
programme for the wake-up alarm.You can
select an FM station by using the
Ȭ
keys
(the
09
keys are only used to select TV
programs).
! Activate: the settings include:
• Once for a single alarm,
• Daily for each day,
• Stop to cancel.
ç Press b
to put the TV set in standby. It will
automatically come on at the time programmed.
If you leave the TV set on, it will just change
programmes at the time entered (and will go to
standby mode at the Stop Time).
TV Menu
Picture
Sound
Features
Install
Mode
Timer
Sleep
Time
Start Time
Stop Time
Program No.
Activate
10:56