Brother Innov-IS 4000D - Manual (Page 5)

Border Hoop Picture Frame
Early Irwin Brother Educator Page 1
This project is for Brother’s ULT2001, 2002D, and 2003D machines
Material and Supplies:
• Brother ULT sewing/embroidery machine with Border Hoop capability
• Brother Border/Frame Kit (SABFK2004)
• Brother Memory Card 67 (Design #23)
• Brother Satin Embroidery Thread - emerald
green (507), lilac (612), deep rose (086), lavender
(804) and government gold Metallic (999) (used
on sample)
• Bobbin thread
• 1 piece 12” x 12” starched linen-type fabric
• 1 piece iron-on tear-away stabilizer to cover 12”
x 12” linen (Sulky Totally Stable was used on
sample)
• 2 pieces 7 ¼” x 7 ¼” pieces of linen fabric for
backing
• 2 pieces 7 ¼” x 7 ¼” stiff stabilizer * (Better Bowl was used for sample. Timtex
or several layers of canvas could be substituted.) and 1 piece 3” x 5” for easel
• 3 ½” piece ribbon to hold easel
• Q/Q+ foot and open toe (SA147)
• 3 pieces 7 ¼” x 7 ¼” lightweight fusible web and 2 pieces 3” x 5” for easel
• Seam Sealant
Preparation for Embroidery:
1. Press iron-on tear-away stabilizer to back of 12” square linen.
2. On the right side of the linen square draw a horizontal line 3” from top edge,
using a washable pen or chalk. Draw a vertical line 4 ¼” from the right edge.
Draw another vertical line 7 ¾” from the right edge. These will be used to
line up the design in the hoop.
3. Attach embroidery unit. Turn on machine. Insert card or diskette, which
contains design #23 from Brother Memory Card 67.
4. Select Embroidery Edit, the Border button and then the embroidery card or
disk icon.
5. Rotate the design 45 degrees with thread marks at bottom and corners. Save
to memory.