Philips SHAVER Series 3000 Afeitadora eléctrica - Manual (Page 15)

When the cleaning chamber is filled with
cleaning fluid, do not move it to prevent leakage of
cleaning fluid.
5 Put the small plug in the Jet Clean System and
put the adapter in the wall socket.
The holder automatically moves to the highest
position.
The Jet Clean System is now ready for use.
Using the Jet Clean System
1 Place the shaver upside down in the holder and
push the lever down completely to lock the
shaver into place.
The battery symbol on the Jet Clean System
goes on to indicate that the shaver is being
charged.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
2 Press the on/off button on the Jet Clean
System to start the cleaning program.
The cleaning program has two phases, the cleaning
and drying phase.
The battery symbol on the Jet Clean System
goes out.
During the first phase of the cleaning program,
the cleaning symbol starts to flash and the
shaver is automatically lowered into the cleaning
fluid.
The shaver automatically switches on and off
several times and moves up and down.
The cleaning symbol flashes throughout the
cleaning program, which takes 8 minutes.
,
,
,
,
,
,
ENGLISH 17
4222.002.4998.2.indd 17 27-02-2009 11:34:20