Brocade Communications Systems CNA - Manual (Page 105)

Brocade Adapters Administrator’s Guide 87
53-1001256-01
CNA Properties panel (CNA only)
A
CNA Properties panel (CNA only)
The CNA Properties panel enables you to display the properties that are associated with a selected
Converged network adapter (CNA).
Opening the properties panel
1. Select a CNA in the device tree.
2. Click the Properties tab in the right pane.
Fields and components
Field Description
CNA Parameters
MAC Address The adapter’s media access control address.
Name The name representing the adapter.
Operating Status Whether the CNA is enabled or disabled.
Manufacturer The company that manufactured the CNA.
Model Description The description of the CNA.
Max Speed Supported The maximum speed supported on the CNA, which is 10 Gbps.
OEM Info Information about the original equipment manufacturer, if
applicable.
Card Type The adapter card type; for example, CNA.
Hardware Path The hardware path of the CNA.
Serial # The serial number of the CNA.
Temperature The temperature of the CNA, both in Celsius and Fahrenheit.
Chip Revision The revision level of the chip.
Driver Parameters
It is possible to have multiple pairs of driver information, based on the number and types of drivers installed.
The three driver possibilities include the CNA Network Driver, the FCoE Storage Driver, or a single, unified
driver.
Driver Name The name of the host adapter driver.
Driver Version The version level of the host adapter driver.
Driver Name The name of the second driver, if applicable.
Driver Version The version level of the second driver, if applicable.
Firmware Parameters
Firmware Version The version level of the firmware.
BIOS Version The version level of the BIOS.
Flash Status The flash status; for example, GOOD.
PCI Registers