Brocade Communications Systems CNA - Manual (Page 166)

148 Brocade Adapters Administrator’s Guide
53-1001256-01
BCU commands
B
bcu ethlog --level <port_id>
Ethernet Port commands
bcu ethport --stats <port_id>
--statsclr <port_id>
FC diagnostic commands
bcu fcdiag --fcping <port_id> <rpwwn> [-l lpwwn]
--fctraceroute <port_id> <rpwwn> [-l lpwwn]
--fcecho <port_id> <rpwwn> [-l lpwwn]
--linkbeacon <port_id> {on|off}
--scsitest <port_id> <rpwwn> [-l lpwwn]
FCP initiator mode commands
Note: fcpim - -mpiomode is not supported on Solaris platforms.
bcu fcpim --query <port_id> <rpwwn> [-l <lpwwn>]
--stats <port_id> <
--statsclr <port_id>
--modstats <port_id>
--modstatsclr <port_id>
--pathtov <port_id> tov
--qdepth <port_id> <q_depth_value>
IO Controller (IOC) commands
bcu ioc --stats <port_id>
--statsclr <port_id>
--enable <port_id>
--disable <port_id>
--query <ioc_id>
--intr <ioc_id> <-coalesce | c> {on | off} [<Latency> <Delay>]
Log commands
bcu log --level <port_id> [<critical | error | warning | info>] [-m <fw | ha1 |
fcs | drv | aen | all>]
Logical port (lport) commands
bcu lport --list <port_id>
--query <port_id> [-l <lpwwn>]
--stats <port_id> [-l <lpwwn>]
--statsclr <port_id> [-l <lpwwn>]
Port commands (physical port)
bcu port --list
--name <port_id> [port_name]
--enable <port_id>