Beyerdynamic MCS 20 - Manual (Page 35)

MCS 20 – MCS 221 Microphone Unit
35
english
2 OFF – Microphone unit is not counted to the limit in the “VOICE” operation
This switch refers only to the MCS 221 delegate microphone unit.
3 OFF – Limit does not refer to this microphone unit
The speaker can also turn on his microphone unit or enter a request-to-speak, when the limit is already
achieved.
4 OFF – VOICE operation not allowed
When this switch is set to “OFF”, the voice-controlled activation is not possible (whether this operation
mode has been selected by the chairman). It can be activated with the microphone button, when switch 8
or 5 is set to “ON”.
5 ON – Microphone unit cannot be cleared - can be turned on in all operating modes - observe switch 3
The microphone unit can be turned on in all operating modes, but not when the limit is already achieved.
As switch 3 is set to “OFF” in this example, the speaker can turn on his microphone unit when the limit is
achieved.
6 – without function
7 – without function
8 ON – Microphone button active in the voice-controlled operation mode
When switch 8 is set to “ON”, this microphone unit can be activated via the microphone button in the
voice-controlled operation mode.
When the switches 8 and 5 are set to “OFF”, the microphone unit can only be activated voice-controlled.
Note: When switch 5 is set to “ON”, the function of switch 8 is also activated. This microphone unit can also be
activated with the microphone button in the voice-controlled mode when switch 8 is set to “OFF”.