Bissell 7950 - Manual (Page 10)

10
Plan activities to give carpet time to dry.
Remove easily moved furniture from the room (chairs,
lamps, coffee tables, etc).
Vacuum thoroughly to pick up loose debris and pet hair
before using the ProHeat Self Propelled.
Plan your cleaning route to leave an exit path. It is best
to begin cleaning in the corner farthest from your exit.
Set up the machine following instructions in
the Features section, pages 6-9.
Use Fiber Cleansing Formula in the SmartMix Tank when
cleaning carpets, stairs or upholstery. Use clean water in
the SmartMix Tank for gentle cleaning, rinsing, or when
applying carpet protectant.
Choose the SmartMix setting to match the
cleaning job.
Set the ReadyTools Dial to either Tools/PreTreat or
Floor Cleaning.
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet, high traffic
areas such as entryways and hallways, or stairs.
Set the SmartMix Dial to High Traffic.
Set ReadyTools Dial to PreTreat.
Plug into a proper outlet and turn ON ( I ) both the
Power and SmartTemp Switches.
While pressing the Trigger, slowly make several passes
over the area to be cleaned. Caution: Do not overwet.
Turn the machine Power switches OFF ( O ) and let
BISSELL Deep Cleaning Formula dissolve the tough
soil for 1-2 minutes before continuing.
1.
2.
Operation
3.
4.
1.
2.
3.
4.
1.
Machine Preparation
PreTreating
2 4'
1
3
3'
4
5
6
7
9
10
11
12
EXIT
STAR
T
HERE
Tip:
Try pretreating
stairs or entry
ways with
BISSELL
Tough Stain
PreCleaner™.
Then deep
clean with the
SmartMix®
Dial set on
High Traffic.
2.
3.
4.
5.
Before You Clean Carpets
ug310-5861_7950_205.indd 10 ug310-5861_7950_205.indd 10 3/11/05 8:31:17 AM 3/11/05 8:31:17 AM