Bissell 7950 - Manual (Page 5)

5
How to Put It Together
How to Use This Guide
This User’s Guide has been designed to help you get the utmost
satisfaction from your BISSELL ProHeat Self Propelled deep cleaner.
You’ll find assembly and operating instructions, safety precautions,
as well as maintenance and troubleshooting instructions. Please read
this Guide thoroughly before assembling your deep cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all parts before
assembly. Familiarize yourself with the parts and where they
go. Following this User’s Guide will greatly enhance your ability
to get the most performance from your BISSELL ProHeat Self
Propelled for many years.
Your ProHeat comes in 3, easy to assemble
components plus accessories.
Upper
Handle
Lower Handle
Tool Caddy
The only tool you will need to assemble your cleaner is a Phillips
head screwdriver.
Refer to Assembly Diagram on page 4
Make sure the Powerdrive Knob is in the “ON” position.
Slide Upper Handle onto Lower Handle.
Insert 2 screws into lower holes while gently pushing
down on Upper Handle. See drawing for exact location.
Tighten screws completely.
Position Tool Caddy on back of unit. Insert 4 screws until snug.
Snap tools into storage on the Tool Caddy as shown in
figure 4.
ProHeat assembly is now complete.
WARNING:
Do Not plug in your cleaner
until you have completely
assembled it per the following
instructions and are famil-
iar with all instructions and
operating procedures.
1.
2.
3.
4.
Powerdrive Knob
Tighten
Completely
5.
2.
1.
3.
4.
5.
ug310-5861_7950_205.indd 5 ug310-5861_7950_205.indd 5 3/11/05 8:31:15 AM 3/11/05 8:31:15 AM