Bradley Smoker EXPRESS CRS-3/IR - Manual (Page 8)

Installation Instructions continued . . .
Step 8: Electrical and supply connections, cont’d.
6. Check the temperature when approximately 1.0 GPM water flow
is reached and adjust if necessary (the range of the valve is
95°F–115°F (35°C–43°C). To adjust the temperature, follow the
procedure below:
• Loosen temperature locking nut with wrench.
• Using a blade screwdriver, turn the adjustment stem
counterclockwise to increase the temperature or clockwise to
decrease the temperature (see Figure 7).
• Once desired temperature is reached, tighten nut to prevent
temperature change.
Express ® Crescent ® Lavatory System - CRS-Series
CRS-2/IR, CRS-3/IR Installation Instructions
8 2/8/07 Bradley Corporation • 215-1330 Rev. K; EN 06-915
Installation Instructions continued . . .
Figure 6b
TRANSFORMER
CIRCUIT PLUG
WHITE SPADE
TERMINALS BLACK SPADE
TERMINAL
GREEN SPADE
TERMINAL
BLACK SUPPLY TUBE
(FROM SPRAYHEAD)
RED SPADE
TERMINAL
RED SUPPLY TUBE
(FROM SPRAYHEAD)
GREEN SUPPLY TUBE
(FROM SPRAYHEAD)
COMPRESSION
NUT (110-231)
VERNATHERM™
THERMOSTATIC
MIXING VALVE
SENSOR CIRCUIT
PLUG
SUPPLY INLET
TEMPERATURE
ADJUSTMENT
STEM
TEMPERATURE
LOCKING
NUT
Figure 7