Philips HAIRCLIPPER Series 1000 Tondeuse cheveux - Manual (Page 12)

5 Place the lug of the cutting unit into the slot
(1) and push the unit back onto the appliance
(‘click’) (2).
replacement
If the adapter is damaged, always have it replaced
with one of the original type in order to avoid a
hazard.
Only replace a damaged or worn cutting unit with
an original Philips cutting unit.
1 Push the middle part of the cutting unit
upwards with your thumb until it opens and
then pull it off the appliance.
2 Place the lug of the new cutting unit into the
slot (1) and push the cutting unit onto the
appliance (‘click’) (2).
Environment
- Do not throw away the appliance with the normal
household waste at the end of its life, but hand
it in at an official collection point for recycling. By
doing this, you help to preserve the environment.
2
2
English 12